What to Do When Your Garage Door Remote Stops Working

1. Check the Batteries First

Dead or weak batteries are the most common reason your garage door remote won’t work. Try replacing them with new, high-quality batteries. Even if the indicator light turns on, weak batteries may not send a strong enough signal to the opener.

Pro Tip: Replace your remote batteries every 6–12 months to prevent unexpected issues.

2. Inspect the Remote for Physical Damage

If the batteries are fine, look for signs of wear, cracks, or water damage. A damaged remote case or stuck button can prevent the signal from transmitting properly. If your remote has taken a fall or gotten wet, consider replacing it.

3. Reprogram the Remote

Sometimes your remote loses its connection to the garage door opener—especially after power outages. To fix this, reprogram the remote.

• Locate the “Learn” or “Program” button on your opener unit.

• Press it, then press the button on your remote until the opener light flashes.
  That’s it! Your remote should be paired again.

4. Check the Opener’s Receiver & Antenna

If reprogramming doesn’t work, the issue might be the receiver inside your opener. Check if the opener is powered on and that its antenna is hanging straight down. A bent or broken antenna can block signals from your remote.

5. Watch Out for Signal Interference

Devices like LED lights, Wi-Fi routers, or car chargers can interfere with your garage remote’s signal. Try turning off nearby electronics and test your remote again. If it works, you’ve found the culprit.

6. Test the Wall Switch

If the wall switch opens your garage door but the remote doesn’t, that confirms the opener itself is fine — your remote is the issue. Reprogram it or replace it with a compatible new one.

7. Call a Garage Door Professional

If none of these steps work, it’s time to call a garage door repair expert. A professional technician can check for circuit board issues, wiring problems, or faulty receiver modules.

Final Thoughts

A garage door remote that doesn’t work is frustrating, but in most cases, it’s an easy fix. Check the batteries, reset the remote, or remove interference before calling for help.
If you’re in Richardson, TX, and need fast, reliable garage door repair, our technicians can get your system working perfectly again — safely and quickly.